cisco certification 200-125 ccna exam preparation with practice questions and Answers
A network administrator enters the following command into Router1: ip route 192.168.0.0 255.255.255.0 S0/1/0. Router1 then receives a packet that is destined for 192.168.0.22/24. After finding the recently configured static route in the routing table, what does Router1 do next to process the packet?
drops the packet because the destination host is not listed in the routing table
looks up the MAC address of the S0/1/0 interface to determine the destination MAC address of the new frame
performs a recursive lookup for the IP address of the S0/1/0 interface before forwarding the packet
encapsulates the packet into a frame for the WAN link and forwards the packet out the S0/1/0 interface
Popular Posts
-
The logical topology is always the same as the physical topology. Physical topologies are concerned with how a network transfers frames. P...
-
The host is unable to communicate on the local network. The host can communicate with other hosts on the local network, but is unable t...
-
scalable one way data flow decentralized resources centralized user accounts resource sharing without a dedicated server
-
packet switching microsegmentation domain name resolution path selection flow control
-
The destination networks do not exist. The IP addresses on the router interfaces must be configured as network addresses and not host a...
-
Refer to the exhibit. What can be concluded from the routing table output of router B?
-
0 to 255 0 to 1023 1024 to 49151 49152 to 65535
-
acts as both a client and server within the same communication. requires centralized account administration. hybrid m...
-
VTY interface console interface Ethernet interface secret EXEC mode privileged EXEC mode router configuration mode