R001 : VMware HA must be functional.
R002 : VMware SRM can be used between two sites for DR processes.
R003 : You must be able to see all hosts from a single pane of glass.
From these requirements :
A vSphere 5.0 VCSA can provides an acceptable solution.
A vSphere 5.0 Windows-based vCenter can provide an acceptable
The requirements cannot be met.
Explanation :
The VCSA can function with VMware SRM. However, for SRM functionality, both sites require a vCenter installation. This would limit the choice of single-glass-pane management to Linked mode. A Linked mode installation requires Microsoft technology in the ADAM instance, and thus eliminates the VCSA choice.
Popular Posts
-
How to Get Centos Version You Can Use cat /etc/centos-release Command.Also Using cat /etc/redhat-release and cat /etc/*release* Comman... -
the same process ID the same area ID network addresses and wildcard masks the same router ID the same loop back address
-
IGRP OSPF EIGRP IS-IS
-
It will revert to the user mode. It will perform an auto-complete function. It will go into the global configuration mode. It will give a...
-
Layer 1 Layer 3 Layer 4 Layer 5
-
path determination and packet switching data presentation reliability, flow control, and error detection network media control the div...
-
Subnet masks will be added to the routing updates. Routing updates will be sent out using multicast address 224.0.0.9. Version 1 and 2 up...
-
R1 will drop the packet because R1 does not have a specific route in its routing table to the 10.1.1.0/24 network. R1 will forward the p... -
Enable split horizon in the network. Configure RIPv2 on routers. Add network 192.168.1.0 to the RIP configuration on the JAX router. ... -
Bits per second: 19200 Data bits: 7 Parity: None Stop bits: 0 Flow control: None Bits per second: 9600 Data bits: 8 Parity: None...