cisco certification 200-125 ccna exam preparation with practice questions and Answers
The command ip route 192.168.2.0 255.255.255.0 172.16.2.2 was entered into the router. After network changes were made, the new next hop for the 192.168.2.0/24 network is 172.16.5.1. What should an administrator do so that the router will use the new next hop to reach the 192.168.2.0 network?
Enter the command clear ip route *.
Lower the administrative distance for the new path to ensure that it is used first.
Negate the original command and enter a new static route with the new next hop.
Nothing. The router will learn of the new next hop and automatically update the route table.
Popular Posts
-
Refer to the exhibit. A network administrator has to develop an IP addressing scheme that uses the 192.168.1.0 /24 address space. The n...
-
source end transfer intermediary
-
Refer to the exhibit. When host A sends a frame addressed for host D, which hosts will receive the frame?
-
Refer to the exhibit. Which route will be installed in the routing table on R1 to forward traffic from PC1 to the web server? the stati...
-
Command : show interfaces status Use In : Privileged EXEC Mode Cisco IOS Command show interfaces status use in switches to view cur...
-
Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8 network from 172.16.40.2 to 192.168.1.2? (C...
-
Refer to the exhibit. What OSPF network statements are required for the router B to advertise the three networks that are attached? rou...
-
Routes to the 10.16.1.0/27, 10.16.1.64/27, and 10.16.1.128/27 networks are added. A connected route to the 10.16.1.128/27 network is ad...
-
Interface S0/0/0 on router R1 is shut down. Interface S0/0/0 on router R1 is configured with an incorrect IP address. Interface S0/0/0...
-
The startup sequence will reset. The router will prompt the user for a response to enter setup mode. The startup sequence will halt unti...