D 172.16.1.0/24 [90/2195456] via 192.168.200.1, 00:00:09,
Serial0/0/0
O 172.16.1.0/24 [110/1012] via 192.168.200.1, 00:00:22, Serial0/0/0
R 172.16.1.0/24 [120/1] via 192.168.200.1, 00:00:17, Serial0/0/0
I 172.16.1.0/24 [100/1192] via 192.168.200.1, 00:00:09, Serial0/0/0
Popular Posts
-
greater distances per cable run lower installation cost limited susceptibility to EMI/RFI durable connections greater bandwidth potential e...
-
source end transfer intermediary -
VTY interface console interface Ethernet interface secret EXEC mode privileged EXEC mode router configuration mode
-
Use the ipconfig command at the host. Use the ipconfig/all command at the destination. Use the tracert command at the host. -
Data will be forwarded to the wrong node. Data transmitted through that cable may experience signal loss. An improper signaling method w...
-
A Class C address has been assigned for use in the network shown in the graphic. Using VLSM, which bit mask should be used to provide ... -
html p tag (paragraph tag) use to add paragraphs in html <p>this is a html paragraph</p> <p>html code for new parag...
-
1. pings from R1 to the S0/0/0 interface on R2….successful 2. pings from R1 to the Fa0/0 interface on R2….successful 3. pings from host... -
Refer to the exhibit. All routers in the exhibit are running RIP v1. The network administrator issues the show ip route command on ro... -
The router will be reset to the default factory information. The router will not forward routing information that is learned from other rou...