Refer to the exhibit. All routers are properly configured with
default configurations and are running the OSPF routing protocol. The network
is fully converged. A host on the 192.168.3.0/24 network is communicating with
a host on the 192.168.2.0/24 network.
Which path will be used to transmit the data?
The data will be transmitted via R3-R2.
The data will be transmitted via R3-R1-R2.
The traffic will be load-balanced between two paths — one via R3-R2, and the
other via R3-R1-R2.
The data will be transmitted via R3-R2, and the other path via R3-R1-R2 will be
retained as the backup path.
cisco certification 200-125 ccna exam preparation with practice questions and Answers
Popular Posts
-
Refer to the exhibit. A network administrator has to develop an IP addressing scheme that uses the 192.168.1.0 /24 address space. The n...
-
Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8 network from 172.16.40.2 to 192.168.1.2? (C...
-
source end transfer intermediary
-
Command : show interfaces status Use In : Privileged EXEC Mode Cisco IOS Command show interfaces status use in switches to view cur...
-
Routes to the 10.16.1.0/27, 10.16.1.64/27, and 10.16.1.128/27 networks are added. A connected route to the 10.16.1.128/27 network is ad...
-
Refer to the exhibit. Which route will be installed in the routing table on R1 to forward traffic from PC1 to the web server? the stati...
-
Refer to the exhibit. What OSPF network statements are required for the router B to advertise the three networks that are attached? rou...
-
Refer to the exhibit. When host A sends a frame addressed for host D, which hosts will receive the frame?
-
Interface S0/0/0 on router R1 is shut down. Interface S0/0/0 on router R1 is configured with an incorrect IP address. Interface S0/0/0...
-
The startup sequence will reset. The router will prompt the user for a response to enter setup mode. The startup sequence will halt unti...