OSPF use Hop Count as Metric
it supports VLSM
Area 0 is Called Backbone Area
OSPF Process id is only Locally Significant
OSPF Default Administrative Distance is 90
Popular Posts
-
VTY interface console interface Ethernet interface secret EXEC mode privileged EXEC mode router configuration mode
-
The IOS image is corrupt. Cisco IOS is missing from flash memory. The configuration file is missing from NVRAM. The POST process has dete...
-
router hub switch firewall access point bridge
-
straight-through rollover cross-over serial
-
source and destination MAC source and destination application protocol source and destination port number source and destination IP a...
-
Router1 will perform recursive lookup and packet will exit S0/0. Router1 will perform recursive lookup and packet will exit S0/1. Ther... -
Refer to the exhibit. Routers R1 and R2 are directly connected via their serial interfaces and are both running the EIGRP routing protocol... -
WinterPark(config)# ip route 0.0.0.0 0.0.0.0 192.168.146.1 Altamonte(config)# ip route 10.0.234.0 255.255.255.0 192.168.146.2 Altamonte(c... -
The destination networks do not exist. The IP addresses on the router interfaces must be configured as network addresses and not host a...