Popular Posts
-
The subnet mask of host 2 is incorrect. Host 1 and host 2 are on different networks . The switch needs an IP address that is not confi... -
The router will change the source and destination IP address in the packet before forwarding the frame. The router will change the fram... -
The startup sequence will reset. The router will prompt the user for a response to enter setup mode. The startup sequence will halt unti...
-
Refer to the exhibit. The network administrator has assigned the internetwork of LBMISS an address range of 192.168.10.0. This address ... -
R1(config)# line vty 0 4 R1(config-line)# password check123 R1(config-line)# login ensures that a password is entered before entering ...
-
It is saved in the topology table for use if the primary route fails. It may be backed up by a feasible successor route. It is used by EIG...
-
Refer to the exhibit. A ping between host A and host B is successful, but pings from host A to operational hosts on the Internet fail. Wha... -
used to mark routes as unreachable in updates sent to other routers prevents regular update messages from reinstating a route that may have...
-
modularity security availability quality of service resiliency
-
10.0.0.0/16 is subnetted, 1 subnets D 10.5.0.0[90/205891] via 192.168.1.2, S0/0/0 10.0.0.0/24 is subnetted, 4 subnets D 10.5.0.0[90/20...