source and destination MAC
source and destination application protocol
source and destination port number
source and destination IP address
Popular Posts
-
What is a component of a routing table entry? the MAC address of the interface of the router the destination Layer 4 port number the ... -
RAM permanently stores the configuration file used during the boot sequence. ROM contains diagnostics executed on hardware modules. NVRAM...
-
The data is automatically encrypted. A Telnet server process is running on PC1. The connection is made through a VTY session on the rout... -
is used as a pad for data identifies the source address identifies the destination address marks the end of timing information is used f...
-
packet switching extension of network segments segmentation of broadcast domains selection of best path based on logical addressing el...
-
copies the configuration from a remote machine into RAM copies the configuration from a remote machine into NVRAM copies the configuration...
-
packet switching microsegmentation domain name resolution path selection flow control
-
192.168.4.63 /26 192.168.4.129 /26 192.168.4.191 /26 192.168.4.51 /27 192.168.4.95 /27
-
Serial0/1 is shutdown. There is no cable connecting the routers. The remote router is using serial 0/0. No clock rate has been set.
-
The host is unable to communicate on the local network. The host can communicate with other hosts on the local network, but is unable t...
